Get a Free Quote

questions & answers

Frequently Asked Questions

Plain answers on choosing a stone, quotes and pricing, what happens from templating to installation, and caring for your counters afterwards. If your question isn't here, call 613‑983‑0663 or ask us through the contact form.

General

What services do you offer?

We fabricate and install granite, quartz, quartzite, marble and porcelain or sintered stone: countertops, vanities, backsplashes and custom pieces. We also design, supply and install tiles, cabinets, lighting and plumbing. We work on homes and commercial spaces, from the first consultation to the final installation.

Do I need to hire you for the whole renovation?

No. You can choose only the parts you need: a countertop on its own, new cabinets and lighting around it, or the whole room. Your quote sets out what is included, so you can compare options and decide what to do now and what to leave for later.

Can you work with my designer, architect or contractor?

Yes. We can work from a designer's or architect's drawings, check them against slab sizes, seam positions and support, and flag anything that needs to change. We can also fit into a contractor's schedule and take on only the parts assigned to us. Share any plans when you request a quote; templating on site then confirms the final measurements.

What kinds of furniture can you make in stone?

We make dining, coffee and side tables, consoles and other pieces built around a stone top or stone panels. For something less usual, send a sketch or a photo of a similar piece, and we will tell you whether it works in stone and what it would need.

What is a waterfall edge?

It is a countertop that turns down at the end of an island or bar and runs to the floor. The top and side meet at a mitred corner, cut at matching angles. For the veining to carry around the turn, both pieces usually come from the same slab, so the layout is planned before cutting and the slab must be large enough for both.

What does countertop and backsplash removal include?

It covers taking out your existing countertops and backsplash and carrying the old material and debris away for disposal. Before we start, the sink, faucet and cooktop must be disconnected and the water shut off. We confirm who takes care of that when we prepare your quote.

Can I keep my existing cabinets under new stone?

Often, yes. Sound, level base cabinets can usually carry stone, although it is much heavier than laminate. Cabinets that sag or have water damage may need repair first, and deeper overhangs for seating may need support brackets. We point out anything we notice when we visit, so you can plan for it.

What should I bring to the showroom?

Rough measurements and photos of the space are the most useful, along with pictures of designs you like. If you have chosen cabinets or paint, a cabinet sample or paint swatch is worth bringing too, since stone can look quite different beside your own colours. None of it is essential; we can start from a conversation.

Do I need to know which stone I want before I visit?

Not at all. It is common to start with a room and a look rather than a material. Tell us how the space is used, how much maintenance suits you and the style you like, and we will suggest stones to compare. Seeing natural and engineered stone together usually makes the trade-offs clearer.

Materials

Can I put a hot pan on a quartz countertop?

It is best not to. Quartz is bound with resin, and a pan straight from the stove, a hot baking dish or a slow cooker left running can mark or crack it. Use a trivet or heat pad every time. If you cook with a lot of high heat, granite, quartzite or porcelain may suit you better, and we can explain the trade-offs.

Should I choose quartz or granite?

Both make durable counters. Quartz suits you if you want an even, predictable look and a surface that does not need sealing. Granite suits you if you prefer a natural pattern, better heat tolerance and a slab you choose by eye, and you are happy to reseal it from time to time. Many people decide after seeing both in our showroom.

Is marble practical for a kitchen?

It can be, if you know what to expect. Marble etches when acids such as lemon, vinegar or wine touch it, and it scratches more easily than granite or quartzite. Many owners accept this as part of its character, especially with a honed finish. If you want a counter that looks unchanged for years, quartzite or quartz may suit you better.

Should I choose a honed or polished marble finish?

Polished marble reflects light and shows the veining at its clearest, but etches appear as dull spots on the shine. Honed marble has a soft, matte surface that makes etching and light scratches harder to see, though it can take up stains a little more readily, so keep it sealed. For kitchens, many people prefer honed. For vanities, polished often works well.

What is the difference between quartzite and marble?

Both are natural metamorphic stones, but they start from different rocks. Quartzite forms from sandstone and is mostly quartz, so it is hard and resists etching. Marble forms from limestone or dolomite, is softer, and reacts with acids such as lemon and vinegar. The two can look alike, with pale stone and soft veining, so it is worth knowing which one you are looking at.

How can I tell if a slab is real quartzite?

Test a sample, not the finished counter. True quartzite will scratch glass, and a drop of lemon juice or vinegar left on it for a few minutes will not leave a dull mark. Stones that fail these checks are usually marble or dolomite, sometimes sold as soft quartzite. We can help you run these checks on a sample before you decide.

Which stone works best for a bathroom vanity?

It depends on who uses the room. For a busy shared bathroom, quartz or porcelain asks the least of you, since neither needs sealing. Granite and quartzite are hard-wearing and usually need resealing from time to time. Marble suits a guest bath or powder room, where acidic cleaners and cosmetics are used less often. Comparing slabs side by side in our warehouse helps narrow the choice.

Can a stone backsplash go behind a range or cooktop?

Yes, with the right material. Porcelain and sintered stone handle heat very well, and granite and quartzite cope well too. Quartz contains resin and can discolour under strong, direct heat, so follow the clearances in your range's installation guide, especially for a high-output range. Oil can darken unsealed natural stone, so keep it sealed and wipe grease off promptly.

Can stone furniture stay outside through an Ottawa winter?

Some materials can. Porcelain and sintered stone rated for outdoor use handle sun and frost well, and dense, sealed granite also does well outside. Most quartz is meant for indoor use, because sunlight can discolour its resin. Marble weathers outdoors and gradually loses its polish. Describe where it will stand, and we will suggest a stone that suits the spot.

Which stones can be backlit?

Only stones that let light through. Most granite and standard quartz are opaque, so backlit pieces use translucent natural stone or engineered surfaces made for backlighting. How much light passes depends on the stone's thickness, colour and pattern, so we assess each slab with your piece in mind.

What is the difference between natural and engineered stone?

Granite, quartzite and marble are natural stone, quarried in blocks and sawn into slabs. Engineered stone usually means quartz: crushed quartz bound with resin and pigments. Porcelain and sintered stone are also manufactured, but from mineral powders fired at high temperatures, with no resin. Manufactured surfaces are more consistent; natural stone varies more from slab to slab.

Which countertop material resists scratches best?

True quartzite, quartz, and porcelain or sintered stone are among the hardest to mark in everyday use, and granite is close behind. Marble is much softer: knives, grit and the unglazed base of a ceramic dish can scratch it. None of the five is scratch-proof, though, so a cutting board is a good habit on all of them.

Which countertop material needs the least upkeep?

Quartz and porcelain or sintered stone are the easiest to look after: neither needs sealing, and mild soap and water keeps them clean. Easy care still has limits, since quartz needs a trivet under hot cookware and porcelain edges need protecting from hard knocks. Granite and quartzite sit in between, with occasional resealing, and marble needs the most attention, because acids etch it.

Can I use the same stone in several rooms?

Yes. Quartz and porcelain follow a set design, so a match is easier, though it still helps to have every piece cut from slabs of the same batch. Natural stone differs between slabs, even under one colour name, so choose the slabs for every room together, ideally from the same block. List each surface you want to match in your quote request.

Process & Timeline

How long does a project take?

Most projects take 5–10 days from template to installation, depending on the stone, the measurements and site conditions.

Can I choose the exact slab for my countertop?

Yes, and for natural stone we recommend it. Granite, marble and quartzite vary from one slab to the next, so the slab itself shows the colour and veining you will get. Quartz and porcelain vary less, but a veined design is still best judged on a full slab or a large sample. You can see slabs in our warehouse, or we can arrange for you to see one at our supplier, and once you choose, we can hold it for you for 7 days, confirmed in writing.

Can you replace the top on my existing vanity?

Often, yes, if the cabinet is solid and level. We take off the old top, measure the cabinet and cut the new stone with openings for your basin and faucet. Older vanities are often lower than current ones, so check that the height still suits you before reusing one. If the faucet or drain needs to move, that plumbing can be part of the same job.

Can I add a stone backsplash to my existing countertops?

Usually, yes. If your counters are staying, we measure the wall above them and cut panels to suit. Matching an older countertop exactly is not always possible, especially with natural stone, so a complementary or contrasting stone is often the better choice. Bring a sample or a clear photo of your counter when you visit the showroom.

How long does an interior project take?

It depends on the scope. Stone work on its own usually takes 5–10 days from template to installation. When cabinets, tile, lighting or plumbing fixtures are part of the job, the timing also depends on product lead times and the order of the trades, so we set the dates once those pieces are chosen.

Does a backlit countertop need an electrician?

A built-in piece usually does. The LEDs run through a power supply, often called a driver, which needs power close to the piece. A new outlet or hard-wired connection should be installed by a licensed electrical contractor before the stone goes in. A freestanding night table can often plug into a nearby outlet.

Do I need to be home for templating?

We recommend it. Some choices are easiest to make standing in the room, such as where a seam should fall or how far the stone should overhang for seating. If you cannot be there, ask someone who can decide for you to attend. Whatever is agreed goes straight into the template.

What if my plans change after templating?

Tell us as soon as possible, and before fabrication begins. The stone is cut to the template, so a different sink, a moved cabinet or a new appliance can change the measurements. Depending on the change, we may need to measure again, which can affect your schedule. We will explain the options before anything is cut.

Will my countertop have a seam?

It depends on the size of the slab and the shape of your layout. Long runs, L-shapes and large islands often need one. We plan seam positions with you at templating, away from the sink where the layout allows. A seam is visible up close, but a tight, flush, colour-matched joint is much less noticeable, especially on patterned stone.

How should I prepare for installation day?

Take everything off the countertops and out of the cabinet under the sink. Leave a wide path from the door to the kitchen, since long pieces of stone need room to be carried in and turned. Keep children and pets away from the work area until the installers have finished.

Pricing & Quotes

Do you provide free estimates?

Yes. Send us rough measurements or photos, and we'll prepare a free quote. Templating is done once you decide to go ahead, to confirm the final measurements.

What affects the price of a granite countertop?

The main factors are the slab you choose, the total area, the edge profile and the number of cut-outs for sinks, cooktops and faucets. A full backsplash, a waterfall end or removing your old countertops adds to the scope. A quote from rough measurements is firmed up once we template. Quotes cost nothing, and each one is covered by our best‑price guarantee.

How much does a curved bar or waterfall island cost?

There is no set price, because each piece is quoted on its own. The cost depends on the stone, the size, the number of pieces and how much shaping is involved. Curves take more machine time, mitred joints take more shop time, and large single pieces can use more of a slab. Send a sketch or drawings for a free quote.

Is my quote covered by your best‑price guarantee?

Yes. Our best‑price guarantee backs every quote we prepare. Its terms, including what it covers and how it applies, are set out in writing with your quote, so you can read them before you decide. If anything in them is unclear, ask us when we go over your quote with you.

What do you need to quote a commercial or multi-unit project?

Counter layouts with dimensions, the finish specification (stone, edge profile, thickness, sink and faucet models), the number of units and your construction schedule. Start through the contact form or call 613‑983‑0663, and email the full drawing set to [email protected]. A first quote comes from the drawings; each space is then measured on site once its cabinets are installed.

Warranty & Care

Do you offer a warranty?

Yes. Every installation is covered by our 3‑year labour warranty, whatever the stone. It covers our own workmanship, such as seams, levelling and sink mounting. It does not cover damage caused by misuse, accidents or changes made by others after installation. Quartz countertops also carry the manufacturer's warranty against manufacturing defects, 15 years or longer depending on the brand. Most quartz warranties do not cover stains, so wipe up spills promptly. We go over the warranty details with you when we review your quote.

Does granite need to be sealed?

Most granite does. It is slightly porous, so a sealer helps it resist oil, wine and other stains. How often to reseal depends on the stone: some dense granites rarely need it, while more porous ones need it more often. To check, leave a few drops of water on the surface for several minutes. If the stone darkens, it is time to reseal.

How do I clean a quartz countertop?

Wipe it with warm water and a little mild dish soap on a soft cloth, then dry it. A plastic scraper lifts dried-on food. Avoid bleach, oven cleaner, strong degreasers and abrasive pads, which can dull or mark the resin. For stubborn marks, use a cleaner made for quartz and follow the manufacturer's care guide.

How do I care for marble countertops?

Wipe up spills as soon as you can, especially acidic ones. Clean with a pH-neutral stone cleaner or mild soap and water, and avoid vinegar, lemon-based products and abrasive powders. Use coasters under glasses, boards for cutting and trivets for hot dishes. Reseal when water stops beading on the surface; the interval varies with the stone and how much the counter is used.

Does quartzite need sealing?

Usually, yes. Quartzite is dense, but most slabs have some porosity, and oil or coloured liquids can leave marks that show clearly on light stone. A penetrating sealer reduces that risk. Some very dense quartzites barely absorb a sealer, so we look at the slab you choose and advise on its care. For routine cleaning, use warm water and a mild, pH-neutral soap.

What care does a stone table need?

Wipe it with a soft cloth and mild soapy water, or a pH-neutral stone cleaner. Avoid abrasive pads, bleach and vinegar. Coasters, placemats and trivets help prevent rings, scratches and heat marks. Granite, marble and quartzite may need resealing now and then; quartz, porcelain and sintered stone do not. Ask us about yours.

How do I look after a backlit stone top?

It depends on the stone. Many softer translucent stones etch with acids, so wipe up wine and citrus promptly, use coasters, and clean with a non-abrasive cleaner made for stone. Switch the lighting off before cleaning around it, and keep water away from the LEDs and their power supply. Ask whether your slab should be sealed, and how often.

When can I use my new countertops?

The adhesives that hold seams and undermount sinks need time to cure. Until they have, avoid running water in the sink, leaning on overhangs or setting heavy items on the seams. Your installer will tell you how long to wait, since it depends on the adhesives used.

What is the best way to clean stone countertops day to day?

For most counters, warm water with a small amount of mild, pH-neutral soap and a soft microfibre cloth is all you need, whatever the stone. Wring the cloth out well, wipe the surface, then buff it dry with a second cloth to prevent streaks and water spots. A spray made for stone also works, as long as its label says it suits your surface.

Which cleaners should I avoid on stone countertops?

Avoid acidic cleaners such as vinegar, lemon juice and citrus sprays: acids etch marble and can break down the sealer on granite and quartzite. Keep bleach, ammonia and strong degreasers out of routine cleaning, and skip abrasive powders and scouring pads, which can dull a polished finish. Many all-purpose sprays and wipes contain acid, bleach or ammonia, so check the label.

What should I do if my countertop gets a stain or a chip?

Start with mild soap and water, since many apparent stains lift with a gentle clean. A stain that has soaked into natural stone, such as oil, can often be drawn out with a poultice made for stone. On marble, a dull patch is usually an etch, which needs refinishing, not a poultice. For a chip, keep any broken piece and contact us before trying a repair kit.

Is sealing a one-time job?

No. A penetrating sealer soaks into the stone's pores rather than coating the surface, and cleaning and everyday use slowly break it down, so granite, marble and quartzite usually need resealing every so often. The usual method is to clean and dry the surface, apply the sealer as its label directs, then wipe off the excess before it dries. Quartz, porcelain and sintered stone skip this step.

Still deciding

Bring Your Questions to the Showroom

Some questions are easier to answer with the slab in front of you. Visit us at 1417 Cyrville Rd, Unit B, Ottawa, or request a free quote and we'll be in touch within 24 hours.